SA-N Series Lead-free Nitrogen Wave Sodering Machine
● Nitrogen environment for soldering process.
● Special strengthening wetting nozzle design ensures the best solder joint quality and prevents the solder dross from staining PCB.
● Solder pot made of 316L Stainless Steel or Iron based with Ceramic Plating or Titanium alloy ensure long life time and stability.
● Top and bottom cooling design ensure fast cooling.
● Whole course watching windows design, easy for watching and cleaning.
● Special flux spraying system design ensures long life time and stability
● Special Flux Anti-dropping design.
● Over temperature protection
● Motorized conveyor width adjustment
● Automatic feeding board
● Four zones preheating system
● Motorized solder pot run in/out system
● Motorized solder pot lift up/down system
● Modular Electrical Control Circuit Design.
● Unmatched uptime
● Easy maintenance
● Independent non-selective flux spraying system is optional.
Specifications
|
Model |
SA-350-N |
SA-450-N |
|
Max.
PCB Width |
350 mm |
450 mm |
|
PCB
Flow Direction |
Std: Left to right, Opt: Right to Left |
Std: Left to right, Opt: Right to Left |
|
Conveyor
Speed |
400 ~ 1800 mm/min |
400 ~ 1800 mm/min |
|
Preheating
Length |
1800 mm |
1800 mm |
|
Preheating
Zone |
Hot Air, 3 Zones (Bottom Only) Top Preheating: Optional |
Hot Air, 3 Zones (Bottom Only) Top Preheating: Optional |
|
Preheating
Temperature Setting |
Room Temperature ~ 250℃ |
Room Temperature ~ 250℃ |
|
Solder
Pot Heater |
18 KW |
18 KW |
|
Conveyor
Motor |
1∮ 220V 90W |
1∮ 220V 90W |
|
Wave
Motor |
2 x 3∮ 220V 250W |
2 x 3∮ 220V 250W |
|
Cleaning
Finger Motor |
1∮ 220V 30W |
1∮ 220V 30W |
|
Solder
Temperature |
Room Temperature ~ 300℃ |
Room Temperature ~ 300℃ |
|
Temperature
Control Method |
PID |
PID |
|
Solder
Pot Capacity |
480 Kg |
520 Kg |
|
Solder
Pot Material |
Iron based with Ceramic Plating |
Iron based with Ceramic Plating |
|
Conveyor
Angle |
4.5º ~ 6.5º adjustable |
4.5º ~ 6.5º adjustable |
|
Startup
Power |
29.5 KW |
36.5 KW |
|
Operating
Power |
12 KW |
13 KW |
|
Finger
Type |
Std: V finger, Opt: Duckbilled finger |
Std: V finger, Opt: Duckbilled finger |
|
Inlet
Conveyor |
Belt Conveyor for "V" finger Chain Conveyor for Duckbilled finger |
Belt Conveyor for "V" finger Chain Conveyor for Duckbilled finger |
|
Conveyor
Width Adjust |
Motorized |
Motorized |
|
Conveyor
Angle Ruler |
Standard |
Standard |
|
Conveyor
Clearance |
Top: 120 mm, Bottom: 12 ~ 15 mm |
Top: 120 mm, Bottom: 12 ~ 15 mm |
|
Flux
Capacity |
12 Liter |
12 Liter |
|
Flux
Flow Meter |
Standard |
Standard |
|
Exhaust
Requirement |
Fluxing Zone: 25 m³/min, Soldering Zone: 10 m³/min |
Fluxing Zone: 25 m³/min, Soldering Zone: 10 m³/min |
|
Power
Supply |
3∮ 380V |
3∮ 380V |
|
Air
Pressure |
>4 Kg/cm² |
>4 Kg/cm² |
|
N2
Consumption |
20 m3/hour |
20 m3/hour |
|
O2
Level |
≤1000 ppm |
≤1000 ppm |
|
Standalone
Flux System instead of the built-in Flux System |
Optional |
Optional |
|
Dimensions
(L x W x H) |
4250 x 1580 x 1650 mm |
4250 x 1580 x 1650 mm |
|
Net
Weight |
1800 Kg |
1900 Kg |
Shenzhen Office: Rm 1701, Bldg B, Shenye U Center, Zhoushi, Xixiang, Baoan, Shenzhen, Guangdong, China.
Jiangmen Factory: S&M Industrial Park, Yunqin Road No.143, Waihai, Jianghai, Jiangmen, Guangdong, China
Tel: +86 755 – 2997 3409; Fax: +86 755 – 2990 9216
E-mail: teddy.tsai@papawtech.com or sm_smt@126.com